Seal Check Test for Sealing Quality Testing of All Sealers Standard-40cm A164 GM164SCS-40 –SHORT CODE: A164

222-110-064_A164 GM164SCS-40; SEAL-CHECK-Standard

Standard DAILY SEALING TEST SHEET.

Compliant with TS EN ISO 11607-2 and DIN 58953.

Contents: 125 sheets x 2 = 250 sheets per box.

These tests should be performed daily every morning before the sealing device is used and should be archived for inspection purposes. These tests are defined in EN-ISO 11607-2 and DIN 58953.

A164 GM164SCS-40; SEAL- CHECK Standard -40cm test sheets for 20 and 40cm wide pouches,

Both are produced in accordance with the standards for the “Sealing Test” according to TS EN ISO 11607-2 for both rotary head and impulse sealers.

One of these test sheets is suitable for the impulse sealers you are using. If desired, it can be cut from the “Scissors” symbol sections, but when testing rotary head devices, never cut from outside the marked areas (narrower than 20cm)! If cut to the correct length, the excess portion can be used later.

How to use: Remove the Seal-Check sheet from its package and cut it to fit into a bag that matches your machine's maximum sealing width.

Place the bag into your device as usual. Once the sealing process is complete, any successful or faulty seals will be clearly visible as shown below. In case of a fault, contact the place where you purchased your device for maintenance and ensure that the necessary parts are replaced to restore your device to factory settings.

A successful test result indicates that your device is operating in accordance with the EN ISO 11607-2 standard. The test result below can be documented on a daily basis.

If you have any other technical questions on this subject, please contact us or our dealer. We are happy to provide you with technical information.

Under the “Related Products” heading below, you can see accessories that can be used with this product. For detailed technical data, you can download the product brochure, technical specifications (may require membership), and our quality certificates, etc. from the ‘Files’ tab above. If available, you can watch the product in operation from the “Videos” tab.